Next up photos from week 40 😎 Take a look!
![]() |
Chevrolet 3100 |
Once I got my GT250 on its wheels it was time to fabricate a sidestand for it which allowed me to not keep it on a mechanic stand all the time. I wanted to use bar and spring from a sidestand I had kept from one of previous my bikes and utilize stock mount on the GT250 frame. This way I only needed to fabricate a bracket in between them.
![]() |
Assembly of sidestand bracket |
![]() |
Dimensions for plate |
![]() |
Dimensions for blank |
![]() |
Piece of flat bar bent with a press brake |
![]() |
Bolt holes drilled and edge trimmed |
![]() |
Holes for pin and bar drilled and profile of edge cut |
![]() |
Dimensions for pin |
![]() |
I didn't have 10 mm round bar so I utilized a piece from a long enough M10 bolt to make the pin |
![]() |
Pin welded to the plate |
![]() |
Dimensions for support plate |
![]() |
Support plate tacked to the plate |
![]() |
First mock up |
![]() |
Bar was bit too long so it had to be shortened |
![]() |
Starting point |
![]() |
Unnecessary pieces cut off |
![]() |
Piece of square tube... |
![]() |
...tacked.. |
![]() |
...and welded to stock sidestand mount |
![]() |
Bottom side ground flat and edge profiled |
Here's a throwback to Lahti Cruising held last month. It was rather rainy and windy day and I ended getting soaked while travelling and shooting. Luckily there were still attendance despite the not so good weather so I could capture bit of it. Take a look! 😊
Here are first photos from a local car meet which I've been visiting for the past month after my summer holiday. Bit of a shame that I haven't done that before but it has been nice to test out more my new camera after a long break of events due to Covid-19. Meet is organized each Wednesday at a local bakery and cafe/restaurant called Ulla's Pakari. I have plenty of photos from past few meets which I'll be sharing in upcoming months 😎
Here is final set of photos from last year's Autot ja Viihde car show. Please check out also my other photos from the event from list below 😎 Next it's time to start going through newer content!
![]() |
2019 Ghost of 7 |
And here's first part of Yankee Car Show photos from Autot ja Viihde 2019. Cars were divided into several halls so there was a lot to see and I ended taking quite a lot of photos too. Take a look!
![]() |
Ferrari 275 GTB 6785 |
Let's continue with few photos from X-treme Car Show. It was held side by side Yankee Car Show in convention center of Lahti which I will cover on next part 😊
![]() |
Nissan 200SX S14 with Rocket Bunny Boss Aero Kit @k0ijjari |
Here's a throwback to hobbyist car park of last year's Autot ja Viihde (eng. Cars and Entertainment) car show held at the end of September in Lahti, Finland. I will post more photos from inside bit later! Stay tuned 😎